Pallet Racking Accessories Melbourne
Warehouse Racking Accessories & Supplies Melbourne
ISS Equipment is a trusted Melbourne / Dandenong based supplier of pallet racking accessories, parts and warehouse racking supplies.
Some of the extra racking accessories required may come up in our annual Racking Safety Audit. Others are identified as your storage needs change, such as additional racking bays or height or extra safety components.
ISS Equipment sells warehouse racking accessories to the public, and we also design pallet racking and warehouse racking solutions. The design we create for your storage solution takes into account all accessory requirements. However, there are scenarios when understanding what is available can help you improve the safety and performance of your storage.
Are you getting the best performance and storage efficiency from your warehouse?
Talk to us today: 134 234.
Base Plates
Base Plates are used in both Pallet Racking and Longspan Shelving to secure upright sections to the floor. They are essential elements of safe racking systems and are a standard component of ISS Equipment design and installation.
Board Supports
Board supports are used in both Pallet Racking and Longspan Shelving in conjunction with timber decking to prevent the board from sagging. Board supports are designed to maintain the load capacity of the beam. They do not contribute to increasing the safe workload capacity.
Cable Racking
Cable Racking or Cable Real Suspension is specialist component used in conjunction with Pallet Racking systems for storage of larger cable reels or continuous carpet rolls. They are supported on an axle through the centre of the roll/reel and safely stored on the rack.
Dividers
Dividers are used in both Pallet Racking and Longspan Shelving for separating vertically stored goods. They protect products and improve product access. Dividers come in a range of options to accommodate different types and sizes of stored products.
Fork Entry Bars
Fork Entry Bars are used in conjunction with Pallet Racking to provide forklift access for non-palletised goods such as plasterboard and timber sheets. They raise materials by approx. 72mm above the beam. Fork entry bars allow forklifts to slide the forks underneath the load in the racking.
This is a safer and more reliable solution than using wooden chocks as the entry bars lock into position over the beams preventing any movement on the smooth beam surface.
Frame Spacers
Used in Pallet Racking, Frame Spacers ensure even distance between rows of selective frames and stabilize pallet racking frames when height to the top of the top load is over 6 times the depth of the frame.
Levelling Plates
Positioned underneath footplates, Levelling Plates are used in conjunction with Pallet Racking Systems to ensure the racking structure is vertical and not ‘out of plumb’ and installed within the required leveling tolerances.
Mesh Backing
Used predominantly with Pallet Racking, metal Mesh Backing provides fall prevention for a variety of scenarios. It serves to protect people, product damage and loss.
Mesh Decks
Mesh Decks, used with Pallet Racking and Longspan Shelving, are a great alternative to timber boards in creating warehouse shelving. Mesh Decking is stronger, more durable and cleaner, providing protection for operators and forklift drivers working under tunnel bays. Mesh decks allow you to safely store heavier loads than timber board does not hold dust, creating a cleaner application.
Wire Mesh Decking is suitable for small carton storage and picking and storage of non-standard pallet sizes. Mesh Shelving is ideal for use in temperature-controlled warehousing as well as chill stores and freezers as it allows an even distribution of air and temperatures for stored goods.
Timber Decks
Timber Decks, used with Pallet Racking and Longspan Shelving, are a cost-effective solution for creating warehouse shelving.
Timber Decks are suitable for small carton storage and picking and storage of non-standard pallet sizes. Timber Decks also offer protection for operators and forklift drivers working under tunnel bays.
Pallet Support Bars
Pallet Support Bars, used in Pallet Racking, are designed to provide added support for non-standard sized pallets.
Safety Pins / Clips
Safety Pins / Clips, used in Pallet Racking and Longspan Shelving, are designed to lock racking beams into the frames preventing accidental dislodgement.
Splice Kits
Splice Kits are designed to extend the storage height of the existing frames and are specially shaped to fit tight inside the upright. The 90mm upright splice is to be used when frames are higher than 8,500mm for painted uprights and 12,000mm for pre-galvanised. Each upright connection requires two Splice Plates when extending frame heights.
SWL & Maintenance Signage
Splice Kits are designed to extend the storage height of the existing frames and are specially shaped to fit tight inside the upright. The 90mm upright splice is to be used when frames are higher than 8,500mm for painted uprights and 12,000mm for pre-galvanised. Each upright connection requires two Splice Plates when extending frame heights.
Upright Protectors
Upright Protectors are used in conjunction with Pallet Racking and are designed to protect racking uprights from accidental forklift damage. They are an essential component of Pallet Racking safety. ISS Equipment inspects Upright Protectors during prescribed Racking Safety Audits we conduct for our clients.
Racking Safety and Compliance
ISS Equipment provides 360-degree service for all Pallet Racking configurations. Our team will design, engineer and efficiently install your tailored solution. To ensure the ongoing safety and compliance of your racking system, we also provide regular Racking Safety Inspections service as required by the relevant state and national regulations.